Operating voltage: DC 5V-24V
Maximum load current: 12A
Maximum remote distance 15M at open area
Working temperature: -20-60Ã¢ÂÂ
Function: adjusting light, blinking flashing
1.Turn On/standby
2.lighting mode
3/8/9. Dimmer adjust shortcuts
4/6 Dynamic mode adjust
5/7 speed adjust
10/11 Brightness adjust

Instructions for RF Wireless Remote
-Turn On/ Standby
Press this key to turn on unit or switch to standby mode.
Unit will turn on and restore to previous status at powering on moment.
-Lighting mode
Switch to lighting mode from dynamic mode.
3/8/9. Dimmer Adjust Shortcuts
Switch to 100%, 50%, or 25% brightness lighting mode.
4/6. Dynamic Mode Adjust
Switch to dynamic mode from lighting mode, or switch between different dynamic modes.
5/7. Speed Adjust
Adjust playing speed of dynamic modes. Press SPEED+ to increase seed and press SPEED- to decrease.
10/11. Brightness Adjust (Dimmer)
Adjust lighting mode brightness. Press BRIGHT+ to increase brightness and press BRIGHT- to decrease
Installing for RF Wireless Remote:
1)Power Supply
-This unit accepts DC 5V to 24V power supply.
-The red cable should be connected to positive and black cable to negative.
-Please select proper power supply according to the LED application.
2)LED Output
-The red cable should be connected to LED positive and black cable to negative.
-The peak output current is 12A, please reduce load if main unit is overheating.
-CAUTION: Do not short circuit the LED output, this may lead to permanent damage!
3)Remote Control
-Please pull out the insulate part before using. The RF wireless remote signal can pass through barrier,
so it\'s not necessary to aim at the main unit when operate. For proper receiving remote signal,
do not install the main unit in closed metal parts.

Notes:
1. Power supply
This unit accepts DC 5V-24V power supply. The red cable should be connected to positive and black cable to negative. Please select proper power supply according to the LED application.
2. LED output
The red cable should be connected to LED positive and black cable to negative. The peak output current is 12A, please reduce load if main unit is overheating.
CAUTION! Do not short circuit the LED output, this may lead to permanent damage!
3. Remote control
Please pull out the insulate part before using. The RF wireless remote signal can pass through barrier, so it is not necessary to aim at the main unit when operate. For proper receiving remote signal, do not install the main unit in closed metal marts. The remote battery is 3V CR2025 Type, please only replace with same type battery.

package included:
-5-24V RF Wireless Remote Controller

A complete lighting system needs: 1. LED light source, 2. controller system, 3. power supply system.

#Letsparty.au #Australia #PartySupplies #LED #Party #Strip #Wireless #Remote #Controller #Dimmer #Caravan #Camping

5-24V RF Wireless Remote Controller Mini LED Strip Light Dimmer Caravan Camper