Plasterboard Patch 10pk - Self Adhesive Wall Repair Patch Kit for Drywall Holes

Description

A wall repair patch is a self adhesive aluminium mesh square you stick straight over a hole in plasterboard, skim with filler and sand flat - no cutting the wall open, no backing timber, no new sheet. This kit gives you 10 patches in your choice of 6 inch or 8 inch, plus a triangle scraper and a sheet of sandpaper to finish the repair.

A hole in a plasterboard wall used to mean the same miserable afternoon. Score a neat square around the damage, cut it out, screw a timber batten in behind it, cut a fresh piece of board to fit, and only then start filling. It puts dust through the whole house and it almost always means a second trip to the hardware store. A mesh patch skips every step of that. The aluminium sits flat against the wall, the mesh gives the filler something to key into, and the finished repair ends up flush with the surface instead of sinking in as it dries.

Specifications

What's in the Box

Why a Mesh Patch Beats Cutting the Wall Open

• Nothing gets cut out - the patch spans the hole and sticks to the sound board around it, so you never open the wall up further than the damage already goes.
• The mesh stops the crack coming back - filler laid straight over a void shrinks and splits. Laid over mesh it has something to grab, so the repair stays flat instead of hairline cracking a month later.
• Rustproof aluminium - it will not bleed a brown stain through your paint the way an untreated metal patch can, and it holds its shape rather than sagging into the cavity.
• Ten patches, not one - enough to go around a whole house at end of lease, or to keep a few spares in the shed for the next time.
• Far less dust - no sawing plasterboard means no fine white dust settling through the room, which is the part everybody hates about wall repairs.

How Do You Fix a Hole in a Plasterboard Wall?

Start by tidying the hole. Trim off any torn paper and loose crumbling plaster with a knife so the surface around the damage is flat and firm, then wipe the dust away - adhesive will not stick to a dusty wall. Peel the backing off a patch, centre it over the hole so it overlaps solid board on every side, and press it down firmly with the triangle scraper working from the middle outwards. Skim a thin coat of filler or joint compound over the mesh with the scraper, feathering the edges out well past the patch so there is no visible ridge. Let it dry, put a second thin coat on rather than one thick one, then sand it back with the included sandpaper until you cannot feel the edge with your hand. Prime and paint. Thin coats and a wide feather are what makes a repair invisible - not more filler.

What Size Patch Do You Need?

The patch has to overlap sound, solid plasterboard the whole way around the hole, so pick the size that leaves a decent margin rather than the one that only just covers it. The 6 inch is the everyday size for screw holes, doorstop dings, picture hook damage and small knocks. The 8 inch is what you want for the bigger ones - a door handle punched through, a TV bracket pulled out, or damage that has crumbled outwards past the original impact. If you are between sizes, go bigger. A larger patch means a wider feather, and a wider feather is easier to hide, not harder.

Do You Still Need Filler and Paint?

Yes. The patch is the backing, not the finish. It bridges the hole and gives the filler a surface to bond to, but you still need joint compound or a wall filler to skim over it and paint to match the rest of the wall. That is the honest answer, and it is worth knowing before you order so you can pick up filler in the same trip. What this kit saves you is the cutting, the batten, the offcut of board and the dust - not the filling and painting.

Who Buys These

Renters heading into an end of lease inspection, which is far and away the biggest reason these sell in Australia - a wall full of picture hook holes is the sort of thing that quietly costs you part of your bond. Landlords and property managers turning a place around between tenants. Parents whose kids have put a door handle, a chair or an elbow through the hallway. Anyone taking down a TV wall mount and finding four gaping anchor holes behind it. And tradies who keep a pack in the ute because small plasterboard damage turns up on nearly every job.

Pair It With

Once the wall is patched and painted, the Handheld Clean-Cut Paint Edger or the larger Clean-Cut Paint Edger Roller Set gets you a straight line at the cornice without masking tape. To stop the next round of holes, the Self-Drilling Plasterboard Wall Anchors hold far better than a bare screw, and the D-Ring Picture Frame Hooks spread the load properly. If you would rather not make holes at all, the 10pk No-Drill Brick Hooks and 3M VHB Heavy-Duty Double Sided Tape hang things without touching the plasterboard. For garage and shed walls the Heavy-Duty Garage Wall Hooks take the weight properly, and a Telescopic COB Work Light makes it much easier to see whether your filler is actually flat.

Frequently Asked Questions

What is a wall repair patch?
It is a stiff self adhesive square with a mesh face that sticks over a hole in plasterboard and bridges it. The mesh holds the filler you skim on top, so the repair sets flat and solid instead of sagging into the cavity behind the wall.

Can you use these on a ceiling?
Yes, the same method works overhead - clean the area, press the patch on firmly, and build the filler up in thin coats rather than one thick one, because gravity is working against you. Expect it to take a little longer to get flat than the same repair on a wall.

Will the patch show through the paint?
Not if you feather the filler out well past the edge of the patch and sand it back properly. Almost every visible patch repair is caused by the same thing: filler stopped too close to the edge, leaving a raised square that catches the light once the wall is painted.

Does it work on plaster as well as plasterboard?
It works on any flat, firm, dust-free surface the adhesive can grip - plasterboard, gyprock and solid plaster all work. What it will not do is stick to crumbling plaster, so trim back anything loose until you reach sound material before you apply it.

How big a hole can it cover?
Whatever the patch can span while still landing on solid board all the way around. Choose 6 inch for small everyday damage and 8 inch for larger holes. Damage bigger than the 8 inch patch will span is a job for a cut-in plasterboard repair instead.

Do I need filler as well?
Yes. The patch and filler do different jobs - the patch bridges the hole, the filler makes it flat and paintable. You will need joint compound or a general purpose wall filler, plus paint to match your wall. The scraper and sandpaper you need are already in the kit.

Can I paint straight over the patch?
No. Paint alone will not hide the mesh texture or the edge of the patch, and it will look worse than the hole did. Skim it with filler, sand it flat, prime the bare filler so it does not drink the topcoat unevenly, then paint.

Fast Australian Shipping

We ship from Australian stock to Sydney, Melbourne, Brisbane, Perth, Adelaide, Hobart, Canberra and Darwin, and to regional addresses in every state. If you have an inspection date coming up, order early enough to leave a day or two for the filler to dry properly between coats.

Please allow a small variation in measurements, as sizes are taken by hand. Colours may look slightly different on screen due to lighting and monitor settings. Always check for electrical wiring and plumbing before cutting, drilling or working into a wall cavity.