3 Mins Hourglass Sand Timer Kids Gifts Egg Kitchen Smiley Tooth Brushing Clock

Description

Package Includes:

Lid

Funnel

45 Degree Elbow x 2

Fluid Stopper

5 inches Straight Extension

Large Cap A

Medium Cap B

Small Cap C

Threaded Cap D

Large Adapter A with Gasket

Medium Adapter B with Gasket

Small Adapter C with Gasket

Threaded Cap Adapter D with Gasket for GM

Threaded Cap Adapter E with Gasket for Ford




Instruction:
1. First install the correct-sized adapter into the correct cap. Place the gasket in a downward position. Tighten the cap with an adaptor to make sure it doesn’t leak.

2. If a 45° elbow or extension is needed, place the funnel after the elbow or extension is placed well into the adapter opening.

3. Fill the funnel slowly and carefully with coolant about 1/3 full.

4. When running the engine with a funnel attached, the fluid level should be at a low position. Keep RPM in an idle position. (Shut down the engine if notice the fluid level rise excessively. Wait for the fluid level to go lower before restarting the engine.)

5. Use Fluid Stopper for the remaining fluid inside the funnel to flow to the radiator hose by squeezing it and release.

6. After finishing, remove the funnel ( and or extension/elbow) & adapter, and close the radiator with the cap tightly.

7. Please allow a 1-3 cm difference due to manual measurements.