Description
This oven and BBQ scraper is a heavy duty cleaning brush measuring 20 x 7.2cm, with hard-wearing steel wire bristles and an integral steel scraper blade at the head, priced at $22.99 with fast Australian shipping. The bristles handle loose grease and carbon; the scraper handles what the bristles cannot shift.
The scraper is the part that matters, and it is the part most brushes leave out. Bristles are good at the soft layer - fat, marinade, ash - but they slide straight over the hard black carbon that welds itself to a grill bar or the floor of an oven after a few hot cooks. A flat steel edge gets underneath that and lifts it off. Having both on one head means you are not putting the brush down halfway through to fetch something else, which is usually the moment a cleaning job gets abandoned.
Specifications
| Material |
Steel wire bristles with steel scraper |
| Size |
20 x 7.2cm |
| Head |
Bristles plus integral scraper blade |
| Construction |
Heavy duty |
| Suits |
Barbecue grills, oven interiors, grill plates, racks |
What's in the Box
| 1 x |
BBQ and oven grill brush with scraper |
Why Choose This Grill Brush
-
Two tools on one head - bristles for the soft layer and a steel edge for baked-on carbon
-
Short and controllable - at 20cm you can lean on it, which is what actually removes carbon
-
Steel throughout - no plastic bristles to melt against a warm grill
-
Works on ovens too - the same job on an oven floor, a grill plate or a rack
-
Nothing to consume - no pads, no chemicals, no refills
What Is the Steel Scraper on a Grill Brush For?
Carbon. When fat hits a hot grill bar it polymerises into a hard black glaze that is chemically nothing like the grease that landed there. Bristles flex around it. A rigid flat edge held at a shallow angle gets under the edge of that glaze and pops it off in flakes, which is why professional kitchens keep a scraper by the grill and not just a brush. Work the scraper first on the worst patches, then follow with the bristles to sweep the debris away.
Are Wire Bristle Grill Brushes Safe to Use?
They are, with one precaution that is worth taking seriously. Wire brushes shed bristles as they age, and a loose bristle left on a grill bar can end up in food - this is a documented and genuinely nasty hazard, not a theoretical one. The protection is simple and takes ten seconds: after brushing, wipe the grill bars with a folded damp cloth or a sheet of paper towel held in tongs, and look at what comes off. Replace the brush as soon as bristles start coming loose, splaying or thinning. A worn wire brush is not worth keeping.
How Do You Clean a Grill Brush Itself?
Knock the loose debris off against a bin edge while it is still warm, then rinse the head under a hot tap and let it dry standing bristles-up so water does not sit in the head. Do not leave it soaking - the wire will rust from the base outward where you cannot see it, and rusted wire is exactly what starts shedding. Store it dry and indoors rather than hanging on the barbecue through a wet winter.
Buyers are typically people who use a barbecue weekly through summer, anyone facing an oven that has been ignored for a while, and food van and cafe operators who go through grill brushes fast enough to buy them a few at a time.
See more in our Kitchen & Dining range, or browse Kitchen Gadgets for the rest of our cleaning and cooking tools.
Frequently Asked Questions
Can I use it on a hot grill?
On a warm grill, yes - warm carbon lifts more easily than cold. On a fully hot grill take care, and never with bare hands near the bars.
Will it scratch my grill plate?
Steel wire on cast iron or stainless bars is normal practice. It is not suitable for non-stick or enamelled surfaces, which need a soft tool.
Is it dishwasher safe?
We would not. A dishwasher leaves the wire wet in a closed cavity, which is how a wire brush starts to rust.
Does it have a long handle?
No. It is a 20cm hand brush, which is what gives you the leverage to press hard on carbon.
How long does one last?
It depends entirely on use. Replace it when bristles loosen or splay rather than waiting for it to fall apart.
Can I use it on an oven with a self-clean coating?
No. Catalytic and pyrolytic oven linings are damaged by abrasion. Use it on grill plates, racks and bare oven floors only.
Does it come with a hanging hook?
The supplier does not specify one. The product images show the handle design.
Fast Australian Shipping
We ship from within Australia to Sydney, Melbourne, Brisbane, Perth, Adelaide, Hobart, Canberra and Darwin, plus regional addresses nationwide, dispatched promptly with tracking.
Wire brushes can shed bristles with age and wear. Always wipe grill surfaces with a damp cloth after brushing and inspect them before cooking, as a loose wire bristle transferred to food is a serious hazard. Replace the brush at the first sign of loose, splayed or thinning bristles. Not suitable for non-stick, enamelled, catalytic or pyrolytic surfaces. Keep away from children. Dimensions are supplier-stated and may vary slightly.
