Nose Pads for Glasses - Silicone Anti-Slip Stick-On Eyeglass Cushions

Description

These stick-on nose pads for glasses are soft silicone cushions that adhere directly to your frames, stop the glasses sliding down your nose and take the pressure off the bridge. They fit both prescription glasses and sunglasses, need no tools and no optometrist visit, and they work on plastic frames that were never made with nose pads in the first place. Supplied as multiple pairs so you can replace them as they wear.

Glasses that slide are not a minor annoyance - they are a full day of pushing frames back up, of lenses sitting in the wrong part of your vision, and of two red dents either side of your nose by evening. It gets worse in summer, worse when you have a low or flat nose bridge, and worse with heavy lenses. A silicone pad adds grip and a millimetre or two of lift, which is usually all it takes to hold the frame where it belongs and spread the weight over a wider area.

Specifications

What's in the Box

Why These Silicone Nose Pads Beat Tightening Your Frames

• They add grip, not pressure - bending the arms in to stop slipping just squeezes your temples. Silicone grips the skin at the bridge instead, where the weight actually sits.
• They lift the lenses off your cheeks - a millimetre or two of standoff stops lashes brushing the lens and stops cheek grease smearing the bottom of your vision.
• They work on plastic frames with no nose pad arms - full acetate and injection moulded frames have a fixed bridge and nothing to adjust. A stick-on pad is the only practical fix.
• They spread the load - a wider soft contact area means less of that concentrated dent that heavy lenses leave on the sides of the nose.
• You get multiple pairs - adhesive pads are consumable. Having spares on hand means you replace them when they lose grip instead of putting up with slipping specs for months.

Can You Add Nose Pads to Plastic Frames?

Yes - stick-on silicone pads are the standard answer for plastic frames. Acetate and plastic frames are made with a solid moulded bridge and no nose pad arms, so an optometrist cannot fit or adjust screw-in pads the way they can on a metal frame. Self adhesive pads bypass that entirely: they bond to the inside faces of the bridge where the frame currently rests on your nose. This is also the fix for the common problem of a plastic frame that sits too low because the bridge is cut for a higher nose profile than yours - the added thickness of the pad raises the whole frame slightly and holds it there.

How Do You Fit Stick-On Nose Pads?

Clean both bridge surfaces of the frame with an alcohol wipe or a little methylated spirits on a cloth to remove skin oil, then let them dry completely - adhesive will not bond to a greasy or damp surface, and this is the single most common reason pads fall off. Peel one pad from the backing sheet, touching only its edges. Position it on the inside face of the bridge where the frame contacts your nose, then press firmly for about 30 seconds. Repeat on the other side, matching the position so the frame sits level. Leave the glasses off for a few hours, ideally overnight, before wearing them so the adhesive can cure fully.

Do Nose Pads Leave Marks on Your Nose?

Any glasses can leave marks, and pads change the picture rather than removing it completely. Marks are caused by weight concentrated in a small area over a long period, so a wider, softer silicone pad usually makes them much fainter because the same weight is spread across more skin. What they will not do is fix a frame that is genuinely too heavy or too tight for you - if you still get deep dents that take an hour to fade, the frame itself needs a professional adjustment, or lighter lenses. Marks that come with soreness, broken skin or a rash are not normal and are worth showing to an optometrist.

Are Glasses Nose Pads Universal?

Stick-on pads like these are close to universal, because they attach by adhesive rather than clipping into a specific fitting - if the frame has a bridge, a pad will stick to it. That is the advantage over screw-in replacement pads, which come in a range of shapes and mounts (push-in, screw-in, symmetrical, asymmetrical) and have to match the arms already on your frame. The one thing to check is that the flat inner face of your bridge is large enough for the pad to make full contact - very thin wire bridges give the adhesive less to hold onto than a chunky acetate frame does.

Who Uses Them

People with a low or flat nose bridge who find that almost every off-the-shelf frame slides use these constantly, as do people with heavy high-index or thick prescription lenses. Tradespeople and warehouse staff fit them to safety glasses so eye protection stays put while they are looking down. Runners, cyclists and anyone in a hot Australian summer use them because sweat is what turns a well fitting frame into a sliding one. Parents fit them to kids' glasses that keep sliding off during school and sport, and readers who want to stop the constant push-back-up habit while reading in bed.

Pair Them With

Nose pads stop the slide at the front - our Silicone Ear Grips do the same job at the back and the two together stop movement completely. For sport or work, a Glasses Cord Lanyard keeps them on you when they do come off. Keep the lenses clear with our 10pc Eyeglass Cleaning Brushes, protect them in a PU Leather Glasses Case or a Sunglasses Case with Belt Clip, and store a collection in the 6 Slot Eyeglasses Holder Box.

Frequently Asked Questions

Can nose pads be added to plastic frames?
Yes. Stick-on silicone pads adhere to the moulded bridge of a plastic or acetate frame, which is the one type of frame an optometrist cannot fit screw-in pads to.

Can you replace nose pads on glasses?
These are additions rather than replacements. If your metal frame has screw-in or push-in pads on arms, those are replaced with matching parts. Stick-on pads go on top of or beside an existing bridge and are simply peeled off and renewed.

Are glasses nose pads supposed to be loose?
No. Pads should sit flush and even against the skin on both sides. If one side lifts away, the frame is twisted and needs straightening, otherwise the weight lands on one pad and that side gets sore.

Will they fit sunglasses?
Yes. Sunglasses are usually heavier at the front and slide more in heat, so they are one of the best uses for these pads. They suit both plastic and metal sunglass frames.

How long does each pair last?
It depends on skin oil, sweat and how often you handle the frames. Expect weeks to a few months per pair. You get multiple pairs so you can renew them as soon as grip fades.

How do I remove an old pad?
Lift an edge with a fingernail and peel slowly. Any adhesive left behind comes off with a cloth and a little isopropyl alcohol or methylated spirits. Do not scrape with a blade, as this scratches the frame.

Will they stop my glasses leaving marks completely?
They usually make marks much lighter by spreading the weight over a wider, softer area. They cannot fully compensate for a frame that is too heavy or poorly fitted for your face.

Fast Australian Shipping

These nose pads ship from Australian stock, so there is no long overseas wait for a small fix you want today. We deliver to Sydney, Melbourne, Brisbane, Perth, Adelaide, Hobart, Canberra and Darwin, along with regional and remote addresses right across Australia. Orders placed on a business day are dispatched promptly and tracking is provided with every parcel.

These are general purpose comfort accessories, not a medical device. They are not a substitute for a professional frame adjustment or for advice from an optometrist, and they cannot correct a frame that is the wrong size or prescription for you. Discontinue use if the adhesive causes redness, itching or any skin reaction, and see a health professional if irritation persists. Keep small parts away from young children. Colours and exact dimensions may vary slightly from the images.